Seismic Audio - LE-3000 - Power Amplifier - 3000 Watts

Seismic Audio - LE-3000 - Power Amplifier - 3000 Watts

Power Amplifier - 3000 Watts - Model Number: LE-3000, Power Handling: 2 x 350 Watts @ 8 Ohms, 2 x 700 Watts @ 4 Ohms, Momentary Peak Output 3000 Watts @ 8 Ohm Bridge. , Features Input Gain (dB), Power LEDs, Signal Activity LEDs (Signal), Overload LEDs (Fault), Power Switch, Channel 1 & 2 Level LED Indicator, Cannon and Input Jack Connector, Mode Switch, Ground Left Switch, Binding Post Outputs, Power Select 110V-120V or 220V-240V Power Supply, Power Input IEC Power AC, Fan Grill Two 2 Speed DC Fans. Specifications: Input Impedance Balance: 20K ohms, Non-Balance 10K ohms, Frequency Response: +0, -0.2 dB, 20Hz to 20KHz, Frequency: 60/60 HZ, Input Level +4 dB, Input Voltage: 115/230V AC, Dimensions: 19" W x 13" D x 4" H, Weight: 13 lbs. . Our LE Series amplifiers are designed for the professional DJ & entertainers that need quality power, but have a limited budget.  Every LE Series amplifier provides excellent performance for all speakers.  Features included with the LE amps are Input Gain, Ground Lift Switch to eliminate hum, Power LEDs, Channel 1 & 2 level, LED's indicator, stereo, parallel mono and bridge modes, clip indicator, as well as dual DC fan for efficient cooling to prevent overheating.

  • UPC: 812451016468
  • ASIN: B004991VKQ
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio Speakers, Inc.

Seismic Audio - 10 SPACE RACK CASE Amp Effect Mixer PA/DJ - Wheel/Casters

Seismic Audio - 10 SPACE RACK CASE Amp Effect Mixer PA/DJ - Wheel/Casters

10 Space Rack Case with Casters - Model # SAR10.2 , 10 Space Rack with 4" Casters , Standard 19" Mounting Rail Width , Outer Dimensions with Doors On: , Height: 25 1/4" w/Casters - 19" Without , Width: 21" - Depth: 26" , Inside Dimensions: , Rail to Back with Rear Door On: 20 1/2" , Rail to Rear Edge of Case with Door Off: 18 1/2" , Front Rail to Rear Rail: 17 1/2" , Black with aluminum rails , 3/8" plywood , Light weight, Pro design , Heavy duty and ready for abuse , Front and rear removable doors , Has dual 4" steel link locks on both doors , Dual spring handles on each side , Stackable corners , 4 steel L brackets added for strength per side , Steel rack rails - Front and rear rack rails , 4 Heavy Duty 4" Casters (Two are locking) , 24 rack bolts , Very well braced , This rack is brand new. , One year warranty. This listing is for one of these Seismic Audio Rack Cases. You will receive one case, pictured and described above. This is a standard 19" wide rack case and will hold common music gear.

  • UPC: 812451011821
  • ASIN: B0033YGJ0U
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio Speakers, Inc.

Seismic Audio - 12 SPACE RACK CASE for Amp Effect Mixer PA DJ PRO with Casters

Seismic Audio - 12 SPACE RACK CASE for Amp Effect Mixer PA DJ PRO with Casters

12 Space Rack Case with Casters - Model # SAR12 , 12 Space Rack with 4" Casters , Standard 19" Mounting Rail Width , Outer Dimensions with Doors On: , Height: 29" with Casters - 23" Without , Width: 21" - Depth: 26" , Inside Dimensions: , Rail to Back with Rear Door On: 20 1/2" , Rail to Rear Edge of Case with Door Off: 18 1/2" , Front Rail to Rear Rail: 17 1/2" , Black with aluminum rails , 3/8" plywood , Light weight, Pro design , Heavy duty and ready for abuse , Front and rear removable doors , Has dual 4" steel link locks on both doors , Dual spring handles on each side , Stackable corners , 4 steel L brackets added for strength per side , Steel rack rails - Front and rear rack rails , 4 Heavy Duty 4" Casters (Two are locking) , 24 rack bolts , Very well braced , This rack is brand new. , One year warranty. This listing is for one of these Seismic Audio Rack Cases.  You will receive one case, pictured and described above.  This is a standard 19" wide rack case and will hold common music gear.

  • UPC: 812451011838
  • ASIN: B003IE7QJI
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio Speakers, Inc.

Seismic Audio - 210 Bass Guitar Speaker Cabinet PA DJ 400 Watts 2x10 PRO AUDIO

Seismic Audio - 210 Bass Guitar Speaker Cabinet PA DJ 400 Watts 2x10 PRO AUDIO

2x10 Bass Guitar Cabinet Model #: SA 210, Woofer: Two 10" each has a 50 ounce magnet with a 2" Kapton voice coil, 400 Watts RMS, 800 Watts Peak, Impedance: 8 Ohms, Frequency response: 40Hz 5000Hz, Sensitivity: 97db, 5/8" plywood front panel, Black carpet with black metal corners, Recessed Handle, Full Metal Grill, Terminal cup with two 1/4" inputs, Dual Ports (both in the middle), hxwxd: 18" x 25" x 14", Weight:  55 pounds per cabinet, Condition:  New, One Year Warranty. The 2x10 Bass Guitar Speaker Cabinet gives you the full, tight tone that a bass cabinet should.  With two 10"speakers you get the clear, punchy tone you have been looking for out of your bass amp.  At 400 Watts RMS, this cabinet can handle what most bass guitar amps can throw at it.  Great bass speaker cabinets are very hard to find, especially at a decent price.  The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great.  With your purchase, you will receive a one 2x10 Bass Guitar Speaker Cabinet pictured and described above.  So, put it in your cart today and get ready for years of trouble free, crystal clear sound.

  • UPC: 812451010978
  • ASIN: B001BABOAI
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio Speakers, Inc.

Seismic Audio - PA/DJ Speaker STRAP HANDLE - Cabinet/Amp/Case- w/end caps

Seismic Audio - PA/DJ Speaker STRAP HANDLE - Cabinet/Amp/Case- w/end caps

10" Rubber Handle with a Metal Insert 10" Long by 1" Wide Steel end caps Rubber Handle with Metal Insert Does not include screws Black in colorThis listing is for one of these handles.  You will receive one handle pictured and described above.  These are heavy duty strap handles.  The Seismic Audio brand was designed to make the professional musician, as well as the musician who is low on cash, sound great.  We realize not everyone has $300-$500 for gear, but still needs to sound good for their gigs.

  • UPC: 812451010077
  • ASIN: B001AWDFCM
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio

Seismic Audio - LE-3000Pair - Pair of Power Amplifiers PA/DJ Amp 3000 Watts

Seismic Audio - LE-3000Pair - Pair of Power Amplifiers PA/DJ Amp 3000 Watts

Pair of Power Amplifiers PA/DJ Amp 3000 WattsModel Number: LE-3000 (Pair). Power Handling: Per Amplifier. 2 x 350 Watts @ 8 Ohms. 2 x 700 Watts @ 4 Ohms. Momentary Peak Output 3000 Watts @ 8 Ohm Bridge. Features: Per Amplifier. Input Gain (dB). Power LEDs. Signal Activity LEDs (Signal). Overload LEDs (Fault). Power Switch. Channel 1 & 2 Level LED Indicator. Cannon and Input Jack Connector. Mode Switch. Ground Left Switch. Binding Post Outputs. Power Select 110V-120V or 220V-240V Power Supply. Power Input IEC Power AC. Fan Grill Two 2 Speed DC Fans. Specifications: Per Amplifier. Input Impedance Balance: 20K ohms. Non-Balance 10K ohms. Frequency Response: +0, -0.2 dB, 20Hz to 20KHz. Frequency: 60/60 HZ. Input Level +4 dB. Input Voltage: 115/230V AC. Dimensions: 19" W x 13" D x 4" H. Weight: 13 lbsOur LE Series amplifiers are designed for the professional DJ & entertainers that need quality power, but have a limited budget. Every LE Series amplifier provides excellent performance for all speakers. Features included with the LE amps are Input Gain, Ground Lift Switch to eliminate hum, Power LEDs, Channel 1 & 2 level, LED's indicator, stereo, parallel mono and bridge modes, clip indicator, as well as dual DC fan for efficient cooling to prevent overheating.

  • UPC: 847861010522
  • ASIN: B009LOK62I
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio

Seismic Audio - SAMRC-12U - 12 Space Rack Case with Slant Mixer Top and Casters - PA/DJ Pro Audio Road Case

Seismic Audio - SAMRC-12U - 12 Space Rack Case with Slant Mixer Top and Casters - PA/DJ Pro Audio Road Case

12 Space Rack Case with Slant Mixer Top and Casters - PA/DJ Pro Audio Road Case - Model #: SAMRC-12U , 12 Space Rack/Road Case with Slant Mixer Top , 10 Space Mixer Top , Weight: 67.2 lbs. , Black with aluminum rails , 3/8" plywood , Light weight, Pro design , Front and top removable doors , Has dual 4" steel link locks on both doors , Dual spring handles on each side , Convenient permanent rear opening for easy accessibility , Stackable corners , 4 steel L brackets added for strength per side , Steel front rack rails , 24 rack bolts , Four heavy duty caster (Two are locking) , Very well braced , Dimensions (With Casters): 24 3/4" x 20 3/4" x 35 1/4" , Dimensions (Without Casters): 24 3/4" x 20 3/4" x 30 1/4" , Condition: NEW , One year warranty. Whether you have a permanent installation or mobile, Seismic Audio's 12 Space Rack Cases are rugged enough to handle whatever you throw at them - road ready and built to last! Great rack cases are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a one 12 space rack case with slant mixer top pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

  • UPC: 847861012748
  • ASIN: B00BQ91V48
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio Speakers, Inc.

Seismic Audio - Pair of Jack Plates with Dual Speakon and Dual 1/4" PA/DJ Speaker Cabinet

Seismic Audio - Pair of Jack Plates with Dual Speakon and Dual 1/4" PA/DJ Speaker Cabinet

Pair of Dual Speakon and 1/4" Jack Plates Metal Jack Plate 4 1/2" x 6 1/4" cut-out hole size: 3 3/8" x 5 1/8" Black in color Has two 1/4" inputs Also has two speakon inputs This jack plate is brand new. One year warranty This listing is for a set of two dual speakon with dual 1/4" Jack Plates. You will receive 2 Jack Plates pictured and described above.

  • UPC: 812451010114
  • ASIN: B001B2MWNY
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio

Seismic Audio - F12S75 - 75 Foot Speakon to Speakon PA/DJ Speaker Cable - 4 Conductor - 12 Guage

Seismic Audio - F12S75 - 75 Foot Speakon to Speakon PA/DJ Speaker Cable - 4 Conductor - 12 Guage

Speakon Speaker Cable - 75 Foot - Model #:  F12S75, Speakon to Speakon Connectors, 12 Gauge Wire, 4 Conductor, PVC Wrapped, Shielded, Locking features, Color:  Black, Length: 75 Feet, Condition: NEW, One Year Warranty Whether you have a permanent installation or mobile, Seismic Audio's Speakon Speaker Cables are rugged enough to handle whatever you throw at them - road ready and built to last. The quality of the cables you use to connect your sound equipment is critical if you are looking for an accurate music and sound reproduction. Awesome quality speak on speaker cables are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a speak on speaker cable pictured and described above.

  • UPC: 812451017397
  • ASIN: B004HOI6Z6
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio Speakers, Inc.

Seismic Audio - SA-APP521 - Class AB Plate Amplifier with 2 Band EQ for PA/DJ Speaker Cabinets - 500 Watt Replacement Amplifier

Seismic Audio - SA-APP521 - Class AB Plate Amplifier with 2 Band EQ for PA/DJ Speaker Cabinets - 500 Watt Replacement Amplifier

PA/DJ Speaker Plate Amplifier Class B Model: SA-APP521. Contents: 250 Watt PA/DJ Speaker Plate Amplifier. Amplifier Type: Class AB. Power Rating: 250 Watts RMS; 500 Watts Peak. Controls: Treble, Bass, and Volume Controls. Line Input: 1/4 and XLR Combo Jack | RCA | 1/4 Inch TRS | 1/8 Inch (3.5mm). Line Output: XLR. Protection: Overload Protection, Over Current Protection, Short Circuit Protection, DC Fan to prevent overheating. Features: 2 Band Equalizer (Treble & Bass) | Mic / Line Switch | Boost / Flat / Cut Switch. Voltage Changeover Switch: 115V/230V. Dimensions: 14.50" x 6.25" x 3.15". Weight: 9.5 lbs. Condition: New. Warranty: One Year WarrantySeismic Audio's line of Plate Amplifiers gives you the ability to build your own powered speaker cabinets and powered subwoofer cabinets. The SA-APP521 is a Class AB amplifier designed for full range PA speaker enclosures. It has a power rating of 250 Watts RMS and 500 Watts Peak. This plate amplifier offers a 2 Band EQ with Treble and Bass Control. This amp also has a Mic/Line switch as well as a 1/8 inch input making it great for DJ and Karaoke applications. When paired with the right loudspeaker driver and speaker, these plate amplifiers produce the loud, clear, and clean sound to reinforce your PA loudspeaker system. With your purchase, you will receive one Class AB 250 Watt Plate Amplifier pictured and described above.

  • UPC: 847861034634
  • ASIN: B01MDNHJMN
  • Brand: Seismic Audio
  • Manufacturer: Seismic Audio