ASM1 - Airo Shock Mount 1 isolating shockmount for shotgun microphones (Original Version)

ASM1 - Airo Shock Mount 1 isolating shockmount for shotgun microphones (Original Version)

When using a shotgun microphone, you need a shockmount to avoid unnecessary noise. The Airo Shock Mount 1 (ASM1) is enhanced by K-Tek's trusted professional microphone suspenders that isolate the microphone from vibration and absorbs movement when the boom is "swinging". These molded rubber suspenders dampen with exponential retention force. It offers the functionality of expensive professional shock mounts in a lightweight package. An included adapter allows the shockmount to be used on boom poles as well as microphone stands. The Airo Shock Mount 1 (ASM1) fits most common shotgun microphones and keeps them securely in place.

  • UPC: 649906207740
  • ASIN: B079G838RS
  • Brand: Airo by K-Tek
  • Manufacturer: Airo by K-Tek

Bestshoot Microphone Shock Mount Universal Holder Clip + Hot Shoe Adapter for Condenser Shotgun Mic AKG D230, Senheisser ME66, Rode NTG-2,NTG-1,Audio-Technica AT-875R Neewer NW-81(1Pack)

Bestshoot Microphone Shock Mount Universal Holder Clip + Hot Shoe Adapter for Condenser Shotgun Mic AKG D230, Senheisser ME66, Rode NTG-2,NTG-1,Audio-Technica AT-875R Neewer NW-81(1Pack)

The Microphone shock mount is the essential tool for any shotgun microphone Microphone shock mount will reduce the vibration so that your sound will sound perfect. It features a four-point suspension to accommodate shotgun microphones measuring 0.99" - 1.5" (25-38mm) in diameter. The shock mount is easily angled with its rubberized adjustment knob    Compability: Rode: NTG1, NTG2, NTG3, NTG4, NTG4+ Sennheiser: MKE600, MKH416, ME66 K6, MKH8060, MKH8070, MKH418 Azden: SGM-1X Audio-Technica: AT897, AT835ST, BP4029, AT4073, BP4073 Schoeps: CMIT 5U, SuperCMIT 2U Shure: VP82, VP89S Neumann: KMR-81i, KMR-81D Sanken CS-1 CS-2 CS-3E Voice Technologies: VT500      Package List : 1 x Mic shock mount (Not Including the Microphone) 4 x Rubber bands 1 x Hot Shoe Mount with 5/8 Screw

  • UPC: 709327270805
  • ASIN: B076HSVZ5G
  • Brand: Bestshoot
  • Manufacturer: Bestshoot

Bestshoot Microphone Shock Mount Holder Clip + Hot Shoe Adapter + 5/8" to 3/8" Screw Adapter + 4pack Replace Silicon O Ring + Foam Handheld Grip for AKG D230 Senheisser Me66 Rode NTG-1 Audio Technica

Bestshoot Microphone Shock Mount Holder Clip + Hot Shoe Adapter + 5/8" to 3/8" Screw Adapter + 4pack Replace Silicon O Ring + Foam Handheld Grip for AKG D230 Senheisser Me66 Rode NTG-1 Audio Technica

The Microphone shock mount is the essential tool for any shotgun microphone The foam handle grip with 1/4-20 thread holes on the botton ,remove the screws is a 3/8-20 thread  holes (can be mounted on a tripod with 1/4-20 or 3/8-20 Screw) The hot shoe with 5/8" Screw on the top and 1/4-20 thread holes on the botton(can be mounted on a tripod with 1/4-20 Screw ) Microphone shock mount will reduce the vibration so that your sound will sound perfect. It features a four-point suspension to accommodate shotgun microphones measuring 0.99" - 1.5" (25-38mm) in diameter. The shock mount is easily angled with its rubberized adjustment knob        Package List : 1 x Mic shock mount 1 x Hot shoe adapter 1 x Foam handle grip 1 x 5/8"-27 to 3/8 Hole 1 x 3/8 Male to 1/4" Female hole 4 x Rubber bands

  • UPC: 709327270782
  • ASIN: B076HMZ1DM
  • Brand: Bestshoot
  • Manufacturer: Bestshoot

Shock Mount for Shotgun Mic Interview Recording, BOYA BY-C04 Camera Microphone Shockmount & Hot Shoe Mount for Professional Shotgun Microphone Senheisser ME66 Rode NTG-2 NTG-1 Audio-Technica AT-875R

Shock Mount for Shotgun Mic Interview Recording, BOYA BY-C04 Camera Microphone Shockmount & Hot Shoe Mount for Professional Shotgun Microphone Senheisser ME66 Rode NTG-2 NTG-1 Audio-Technica AT-875R

Overview The BOYA microphone shock mount features a four-point suspension to accommodate shotgun microphones measuring ¾ to 1" (19-25mm) in diameter. The shockmount is easily angled with its rubberized adjustment knob. There is a built-in shoe for camera mounting, and a 3/8"-16 thread connection at the base mounts the shockmount to boompoles and universal hand-grips. Features Greatly reduces microphone noise caused by vibration, handling, etc Four-Point Silicone Suspension Fits Shotgun Mics Measuring 19-25mm in Diameter Attaches to cameras via hot shoe or stands, boompoles or tripod via 3/8 screw thread Includes spare rubber bands Designed for BY-PVM1000& BY-PVM1000L. For Rode NTG-1, NTG-2, NTG-3, NTG-4 For Audio-Technica AT897, ATR6550, Sennheiser MKH-416, ME66/K6, MKE-600, Azden SGM-1X, Sony ECM-CG50 etc. 3/8" or 1/4" in thread Fits Most Microphones with a 0.74 - 0.86" (19mm-25mm) Package Includes: 1 x BY-C04 Professional Shock Mount 1 x Spare Rubber Bands

  • UPC: 714119376726
  • ASIN: B01919Z7CQ
  • Brand: Boya
  • Manufacturer: BOYA

Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones

Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones

The RODE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 3/4”) in length. Now featuring the Rycote Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimize the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or Dead Wombat fitted). The Blimp attaches to any standard boom pole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boom pole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included.

  • UPC: 989898818549
  • ASIN: B00KV3XPKI
  • Brand: Rode
  • Manufacturer: Rode

Rode SM4-R Suspension Microphone Shock Mount for 3/8" or 5/8" Thread Mounts

Rode SM4-R Suspension Microphone Shock Mount for 3/8" or 5/8" Thread Mounts

The SM4-R is a suspension shock mount for mounting various RØDE microphones onto a mic stand or boom pole with 3/8" or 5/8" thread. The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and integrated cable management clip. The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning.

  • UPC: 698813004638
  • ASIN: B01LS9J7R8
  • Brand: Rode
  • Manufacturer: Rode

Rode VideoMicro Compact On-Camera Microphone with Rycote Lyre Shock Mount

Rode VideoMicro Compact On-Camera Microphone with Rycote Lyre Shock Mount

VideoMicro Compact Directional On-Camera Microphone. The VideoMicro is a compact microphone designed to improve the audio quality of your videos. The VideoMicro reduces distracting peripheral sounds and focuses on the audio in front of the camera. Its pickup is more forgiving than other on-camera microphones, providing a more natural sound when recording indoors. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shockmount. Featuring a suspension structure composed of a rugged thermoplastic, it is far more effective at minimizing unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. he following cameras unfortunately do not support the VideoMicro are Nikon D7000, Canon T3/1100D, Canon C100, C300, C500, Canon VIXIA HFR500, Canon VIXIA HFG20, HFG30, Canon XA-10, Canon Vixia G10, Canon Legria HF G25

  • UPC: 698813004362
  • ASIN: B015R0IQGW
  • Brand: Rode
  • Manufacturer: Rode

Movo SMM300 PRO Microphone Shock Mount with 8-Point Silicone Suspension System for Rode, Azden, Audio-Technica, Sennheiser, Other 18-22mm Diameter Shotgun Microphones

Movo SMM300 PRO Microphone Shock Mount with 8-Point Silicone Suspension System for Rode, Azden, Audio-Technica, Sennheiser, Other 18-22mm Diameter Shotgun Microphones

pending

  • UPC: 817711021053
  • ASIN: B0787F914Z
  • Brand: Movo
  • Manufacturer: Movo

Eggsnow Microphone Shock Mount Clip Universal Mic Holder Stand Anti Vibration for AKG D230 Senheisser ME66 Rode NTG-2 NTG-1 Audio-Technica AT-875R

Eggsnow Microphone Shock Mount Clip Universal Mic Holder Stand Anti Vibration for AKG D230 Senheisser ME66 Rode NTG-2 NTG-1 Audio-Technica AT-875R

Eggsnow Camera Universal Microphone Shockmount Holder Clip for AKG D230, Senheisser ME66, Rode NTG-2,NTG-1,Audio-Technica AT-875R etc (Shock Mount) It features a four-point suspension to accommodate shotgun microphones measuring 0.99" to 1.5" (25-38mm) in diameter. The shockmount is easily angled with its rubberized adjustment knob. There is a built-in shoe for camera mounting, and a 3/8"-16 thread connection at the base mounts the shockmount to boompoles and universal hand-grips. Good to know: The Microphone shock mount is the essential tool for any shotgun microphone It will reduce the vibration so that your sound will sound perfect. It will mount on any camcorder with a standard hot shoe connector It will mount on a boom pole with 3/8 or 1/4-20 threaded mount will also adapt to any mike stand with a 5/16 connector making it a truly universal product. Package List : 1 x Mic shock mount (Not Including the Microphone) 8 x Rubber bands

  • UPC: 638142981279
  • ASIN: B00KXQIU5S
  • Brand: Eggsnow
  • Size: Shock Mount
  • Manufacturer: Topbestsource

Movo VXR10 Universal Video Microphone with Shock Mount, Deadcat Windscreen, Case for iPhone, Android Smartphones, Canon EOS, Nikon DSLR Cameras and Camcorders

Movo VXR10 Universal Video Microphone with Shock Mount, Deadcat Windscreen, Case for iPhone, Android Smartphones, Canon EOS, Nikon DSLR Cameras and Camcorders

galaxy s7 s8 s6 note rode videomic Specifications Polar Pattern: Cardioid Frequency Response: 35 Hz to 18 kHz, +/-3dB Sensitivity: -42dB +/- 1dB/0dB=1V/Pa, 1kHz Signal to Noise Ratio: 76dB Output Connectors: 3.5mm TRS Mini-Jack (for Cameras, Recorders & Camcorders); 3.5mm TRRS (for Smartphones, Tablets, & Mac) Power Requirements: No Battery Required Dimensions (LxD): 0.86 x 3.2" (2.2 x 8.1cm) Weight: 1.8 oz (51g)

  • UPC: 817711020537
  • ASIN: B0723D3FVL
  • Brand: Movo
  • Manufacturer: Movo