20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Display 12V/24V

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Display 12V/24V

☀️Suitable for farm solar power system, solar street light, solar patio light, solar billboards, outdoor camping solar system, ship solar system. Specification: *Batt voltage: DC 12V/24V Auto *Charge /Discharge current: 20A *Over discharge Protection: 10.7V/21.4V *Charge recover voltage: 12.6V/25.2V *Overcharge Floating charge: 13.7V/27.4V *Over discharge Protection: 10.7V/21.4V *Equalization: B01: sealed 14.4V / B02: Gel 14.2V / B03: flood 14.6V Intelligent solar controller: The product can automatically manage the working of solar panel and battery in solar system. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically (LCD will be unavailable at the same time). Easy to operate and installation : Wiring STEPS: Screw the adjustment screw counter-clockwise until the plates move down. Insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it. Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole. Installation STEPS:Connect the system in the order of 1.Battery > 2. Load > 3.PV Array in accordance with Figure, and disconnect the system in the reverse order 3. 2 .1. Note: Please keep it in cool and well ventilated place to maintain good heat dissipation. the regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Make sure your battery has enough voltage for the controller to recognize the battery before first installation. The working temperature of this controller is -35°C to 60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.

  • UPC: 606462134958
  • ASIN: B072MMDY4F
  • Brand: Binen
  • Manufacturer: Binen

PowMr 30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(Z30A)

PowMr 30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(Z30A)

Our advantages:1.This solar power regulator protected with the moisture-tight coating, minimizing damage from humidity and from nesting insects. 2.Dual USB place at both ends of the terminal.it will be better than Dual USB in the same place for dissipate heating,prolong the controller life.supply power to two mobile phones, tablet PCs, and other devices that require 5V power. specifications:*MAX charge and discharge current:30A*MAX input power and voltage:360W/23V(12V)*USB output:Dual USB output,5V/2.5A(MAX)*Equalization:14.4V*Float charge:13.7V(default,adjustable)*Discharge stop:10.7V(default,adjustable) *Discharge reconnect:12.6V(default,adjustable)*Charge reconnect:13V*Size/weight: 5.86*2.87*1.3in/0.44lbX2All green color voltage x2 while using 24V systemSafety Instructions:1. When installing for the first time, please make sure the battery has sufficient voltage so that the Charger controller can recognize the normal battery type and system.2.Make sure the input power and voltage don't exceed 360W/23V(12V battery) and 720W/46V(24V battery).3. Install the Charger controller to the battery as close as possible to avoid voltage and power dropping caused by overlong wire and affect normal voltage judgment. 4. Charge Controller should connect the battery first, and then connect the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order5.Connect the inverter (DC / AC) to the battery. Do not connect to the solar controller.6.The LCD display has an error of 0.2 V- 0.3 V, but this is normal7.The controller will stop output when the battery under 10.7V(adjustable).and it will re-output when the battery up to the 12.6V(adjustable)..8.Do not open the heat sink of the solar controller without permission.Package Includes: 1.1 x 30A Solar Charge Controller2.1X English User Manual

  • UPC: 721361729989
  • ASIN: B074WZB5XY
  • Brand: PowMr
  • Size: 30a solar charge controller
  • Manufacturer: PowMr

ALLPOWERS Dual USB 20A Solar Charge Controller 12V/24V Auto Paremeter Adjustable PWM LCD Solar Controller Regulator with Load Timer Setting ON/Off Hours

ALLPOWERS Dual USB 20A Solar Charge Controller 12V/24V Auto Paremeter Adjustable PWM LCD Solar Controller Regulator with Load Timer Setting ON/Off Hours

Clear stock, buy ASAP Change the default setting of solar controller, requires: 1. Disconnect the solar panel 2. ensure the remain voltage of battery no less than 12V Note: Please keep it in cool and well ventilated place to maintain good heat dissipation the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Make sure your battery has enough voltage for the controller to recognize the battery before first installation. Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation. When the battery voltage is too low, the controller will stop output(≦ 8V, controller turn off itself, LCD is blank,≦ 10.7V, 12Voutput ports are not available); after the solar panels charging, the battery will return to 12.6 V. It is a natural to output. Warm Tips: Only voltage reading in the screen of the solar controller, no amps or amp hours. Specification: *Voltage: DC 12V/24V *Self-consuming: 10mA *Rated Charge Current: 20A *Rated Load Current: 20A *Over Charge Protection: 14.4V/28.8V *Over Charge Floating Charge: 13.7V/27.4V *Charge Recover Voltage: 12.6V/25.2V *Over Discharge Protection: 10.7V/21.4V *Over Discharge Recover: 12.6V/25.2V *USB Output: 5V/3A *Operating Temperature: -35℃-60℃ *Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in Warm Tips: Wire Range 26-10 AWG(4.0mm²)

  • UPC: 331516354289
  • ASIN: B06XWTKYDC
  • Brand: ALLPOWERS
  • Manufacturer: ALLPOWERS

EPEVER Remote Temperature Sensor and Communication Cable CC-USB-RS485-150U USB to PC RS485 Tracer Series Solar Charge Controller

EPEVER Remote Temperature Sensor and Communication Cable CC-USB-RS485-150U USB to PC RS485 Tracer Series Solar Charge Controller

--USB to RS485 adapter used to connect the Tracer A/AN/BN Series MPPT Controller and PC ----------Line length: 1.5m (59 in) --Remote Temperature Sensor for EPEVER Tracer A/AN/BN Series Mppt Charge controller------ Length: 3M(118 in) If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation. --Fit for Tracer A/AN/BN series MPPT charge controller Package: --USB to RS485 adapter*1+ remote tempure sensor*1 RS485 connection to the PC setup steps: https://www.amazon.com/clouddrive/share/OHRB4pQAJ39MIF0HseAcLh1KPbTrZWySBNJG6Dda7A1

  • UPC: 615150291767
  • ASIN: B07MCS2DNR
  • Brand: EPEVER
  • Manufacturer: EPEVER

EEEKit 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

EEEKit 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

Product Description Package Includes: 1 x EEEKit 20A Solar Charge ControllerWarranty and Service24 Months;any questions you have, please don't hesitate to contact us; We will get you back within 24 hoursProduct Specifications: Suitable for farm solar power system, solar street light, solar patio light, solar billboards, outdoor camping solar system, ship solar systemBatt voltage: DC 12V/24V Auto Charge /Discharge current: 20A Over discharge Protection: 10.7V/21.4V Charge recover voltage: 12.6V/25.2V Overcharge Floating charge: 13.7V/27.4V Over discharge Protection: 10.7V/21.4V Equalization: B01: sealed 14.4V / B02: Gel 14.2V / B03: flood 14.6VEasy to operate and installation : Wiring STEPS: Screw the adjustment screw counter-clockwise until the plates move down; Insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it; Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole Installation STEPS Connect the system in the order of 1.Battery > 2. Load > 3.PV Array in accordance with Figure, and disconnect the system in the reverse order 3. 2 .1. Note:Please keep it in cool and well ventilated place to maintain good heat dissipationthe regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteriesMake sure your battery has enough voltage for the controller to recognize the battery before first installationThe working temperature of this controller is -35°C to 60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation

  • ASIN: B07QZXMWLM
  • Brand: EEEKit
  • Manufacturer: EEEKit

HQST 30 Amp 12V/24V PWM Solar Panel Regulator Charge Controller with LCD Display and 5V 1A USB Port for Mobile Phones, Tablets, Speakers

HQST 30 Amp 12V/24V PWM Solar Panel Regulator Charge Controller with LCD Display and 5V 1A USB Port for Mobile Phones, Tablets, Speakers

Description: An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically or when over discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life (with the exception of GEL and lithium batteries. Specifications: Rated Current: 30A Overvoltage Protection: 16.0V Charging Recovery Voltage: 13.2V System Voltage: Automatic Recognition of 12V/24V Weight: 14 Oz Key Features: 12V/24V system voltages are automatically recognized. Charging program options for sealed, GEL and flooded lead-acid batteries and lithium batteries are available. An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically or when over discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life (with the exception of GEL and lithium batteries). With temperature compensation employed, charging parameters can be automatically adjusted (with the exception of lithium batteries). A wide range of load working modes facilitate the product's application to different types of street lights and monitoring devices. The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection. By virtue of an advanced load starting method, large-capacitance loads can be started smoothly. A range of parameter settings and power-down saving functions are available, thus requiring no repeated setting. The product provides a dot matrix graphic LCD screen and a human-machine interface with 2 keys. The user-friendly design of browser and dynamic interfaces ensures convenient and intuitive operations. Boasting an industrial grade design, the product can function well in various tough conditions.

  • UPC: 799475028830
  • ASIN: B00FB3OPKM
  • Brand: HQST
  • Size: 30A
  • Manufacturer: HQST

60A Solar Charge Controller 12V 24V Autoswitch 5V Dual USB Output Blacklight LCD Display 1440W Solar Panel Charging Regulator Anti-Flaming Housing Large Power Heat-Sink

60A Solar Charge Controller 12V 24V Autoswitch 5V Dual USB Output Blacklight LCD Display 1440W Solar Panel Charging Regulator Anti-Flaming Housing Large Power Heat-Sink

This is a new intelligent PWM 60a Solar Charge Controller, which is equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries.The product can be applied to the following occasion:1). Outdoor environment monitoring system2). Automatic control system for agriculture and garden3). Solar power system4). Communication station, WIFI hotspot5). Street lighting system6). other systems which are supplied by solar energy and have requirements power EMI indicatorSpecification:Model: 60A PWM Solar Charge ControllerMax Charging/Discharging Current: 60 AmpsSolar Panel Input Power: 720W/12V 1440W/24VMax Solar Panel Input Voltage: 48VSystem voltage of PV: 24V/48VCompatible battery: lead-acid cell gelUSB Charge port: 5V 1ANote:During the installation and usage, please make sure to obey the following safety regulations and notices to avoid the damage to the controller.1). There is no maintainable part of the controller. The user cannot disassemble or repair the controller without permission.2). before installing and adjusting the connection of controller, please make sure to disconnect the connection of photovoltaic panel and the fuse or breaker around battery terminal.3). after installation, ensure all the wire connections are reliable to avoid heat accumulation for virtual.

  • UPC: 192188303285
  • ASIN: B07B11B2GS
  • Brand: ZHCSolar
  • Size: 60A-12V/24V
  • Manufacturer: ZHCSolar

ZHCSolar Solar Charge Controller 80A PWM 12V 24V 1920W Solar Panel Charger Discharge Regulator with 5V USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Enhanced Heat Sink

ZHCSolar Solar Charge Controller 80A PWM 12V 24V 1920W Solar Panel Charger Discharge Regulator with 5V USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Enhanced Heat Sink

This new intelligent 80 Amp Solar Charge Controller is one of the most popular solar panel charge controllers in ZHCSolar's product, the controller has an efficient charging system and can handle high power input reach to 1920W, this controller equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries. the housing of this controller is made of superior quality ABS material that is extra durable.USB output port also equipped with this controller for electrical devices charging.User Manual is available for DownloadTechnical Parameter Rated Working Current: 80 Amps Rated Working Voltage: 12V/24V DC AutoMax PV Array Input Voltage / Watts (Battery Voltage): 24V/960W(12V), 48V/1920W(24V) No Load Loss:

  • UPC: 192188303216
  • ASIN: B078N17H1F
  • Brand: ZHCSolar
  • Size: 80A
  • Manufacturer: ZHCSolar

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

The Renogy Wanderer 10A solar charge controller integrates efficient PWM charging to increase battery life and improve system performance. Designed with a simple interface for ease of use the controller uses an LCD to notify users of battery information. This advanced charge controller is designed for off-grid solar applications and can be used with a 12V/24V battery or battery bank. The compact size of the controller makes installation a breeze. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults.   Specifications Nominal Voltage: 12V/24V Auto Recognition Max Gauge Size: Up to 12AWG Self-Consumption:

  • UPC: 816360029953
  • ASIN: B07NPDWZJ7
  • Brand: Renogy
  • Size: 10A
  • Manufacturer: Renogy

PowMr 60A Solar Charge Controller,Intelligent USB Port Display 12V/24V Auto Charge Regulator

PowMr 60A Solar Charge Controller,Intelligent USB Port Display 12V/24V Auto Charge Regulator

PARAMETER System Voltage: 12V/24V Auto Charge current: 60A Max input voltage: 24V(12V system); 48V(24V system) Max input power: 780W(12V system); 1560W(24V system) USB output: Dual USB output, 5V/2.5A Batteries:Only fit for OPEN, AGM, GEL Self-consume:

  • UPC: 615150291644
  • ASIN: B07KXG6T99
  • Brand: PowMr
  • Manufacturer: PowMr