Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection

Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection

The Zircon StudSensor e50 is an electronic edge finding stud finder. The e50's body design reduces normal scanning errors and can be comfortably held in either hand at any angle while the rubber over molded grip also provides a secure hold. The SS e50 easily locates the edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. In StudScan mode, the SSe50 locates the edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, an arrow-shaped SpotLite Pointer will illuminate and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor e50, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

  • UPC: 042186682779
  • ASIN: B01HTFHOEI
  • Brand: Zircon
  • Size: Edge Finding
  • Manufacturer: Zircon

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection

The Zircon MultiScanner 740 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires and allows you to mark your target. Complete with the latest technology in density detecting software and circuitry, an ergonomic body design, and an erasable marking system. Unlike other wall sensors, scanners and stud finders, the MS 740 is uniquely designed with a "floating head" that keeps the scanning surface level on textured or rough surfaces so results are more accurate. The 4-mode switch makes it easy to change functions while the ultra-bright display screen, dual SpotLite Pointing System, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner 740 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. In StudScan mode, the multifunctional 740 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Metal Scan mode of the MS740 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, studs can be found behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MS 740 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which finds and traces live, unshi... [Read More]

  • UPC: 042186673258
  • ASIN: B01AHYDWNK
  • Brand: Zircon
  • Size: Integrated Wall Marker
  • Manufacturer: Zircon

Zircon MultiScanner i520- Center Finding Stud Finder with Metal and Live AC Wire Detection

Zircon MultiScanner i520- Center Finding Stud Finder with Metal and Live AC Wire Detection

The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the st... [Read More]

  • UPC: 042186683141
  • ASIN: B01J39MJEI
  • Brand: Zircon
  • Size: Standard
  • Manufacturer: Zircon

khanka Hard Headphone Case Travel Bag for Zircon StudSensor e50 Electronic Wall Scanner/Edge Finding Stud Finder/Live AC WireWarning Detection

khanka Hard Headphone Case Travel Bag for Zircon StudSensor e50 Electronic Wall Scanner/Edge Finding Stud Finder/Live AC WireWarning Detection

Khanka Hard Headphone Case Travel Bag for Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection

  • ASIN: B07K2NPW1T
  • Brand: khanka
  • Manufacturer: khanka

Zircon MultiScanner i320 OneStep Center-Finding Stud Finder with Metal Scanning and DVD How-To Guide

Zircon MultiScanner i320 OneStep Center-Finding Stud Finder with Metal Scanning and DVD How-To Guide

' Electronic Stud Finder, Professional, Multifunction, Center-Finding, Scan Depth Stud 1-1/2 In., Voltage 2 In., Metal 3 In., Scans Wood, Metal, Studs, Accuracy +/- 3/16 In., Battery Type (1) 9V Alkaline, Center-Finding Stud Finder with Metal Scan and Wire Warning Detection '

  • UPC: 042186603767
  • ASIN: B0030GEVW4
  • Brand: Zircon
  • Manufacturer: Zircon

Aproca Hard Travel Storage Case Compatible with zircon studsensor e50 stud finder/electronic wall scanner

Aproca Hard Travel Storage Case Compatible with zircon studsensor e50 stud finder/electronic wall scanner

Hard Travel Carrying Case for Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection by Aproca

  • UPC: 614324864264
  • ASIN: B07C9F8SGS
  • Brand: Aproca
  • Manufacturer: Aproca

Zircon StudSensor 40 with Bonus 9" Level and Picture Hanging Kit - Edge Finding Stud Sensor for Wood and Metal Studs/Live AC WireWarning Detection/Patented SpotLite Pointing System - FFP

Zircon StudSensor 40 with Bonus 9" Level and Picture Hanging Kit - Edge Finding Stud Sensor for Wood and Metal Studs/Live AC WireWarning Detection/Patented SpotLite Pointing System - FFP

The Zircon StudSensor 40 Electronic Stud Finder with Bonus 9" (230 mm) Level and Picture Hanging Kit has the functions you need to get the job done safely the first time. The StudSensor 40 easily locates the edges of wood and metal studs and joists behind walls, floors and in ceilings. The tough designed body is built to withstand every day jobsite use, and sized so that for even small adult hands can use it comfortably. The 2-mode switch makes it easy to switch between functions. In StudScan mode, the stud scanner locates the edges of shallower studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and the scanning depth doubles to 1.5 inches (38 mm). The SS40 stud sensor is also programmed with the WireWarning Detection feature that helps to keep you safe by indicating the presence of live, unshielded electrical wiring up to 2 inches (50 mm) deep. Should you start your scan over a stud, Zircon's patented "over the stud" indicator will alert you to start your scan in a new location. Finding studs with this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete and see the “Ready” LED light, continue to hold the Power Button and slowly slide the tool across the surface. As the stud detector approaches the edge of a stud, the red LEDs progressively light from the bottom up in both scanning modes. The top lighted green LED, SpotLite Pointing System, and audio tone all indicate when the stud’s EDGE is found. DO NOT DRILL HERE! Instead, mark the spot and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the cente... [Read More]

  • UPC: 042186684643
  • ASIN: B01M0UUDZ5
  • Brand: Zircon
  • Manufacturer: Zircon

Zircon StudSensor i65 OneStep Center Finding Stud Finder with Wire Warning

Zircon StudSensor i65 OneStep Center Finding Stud Finder with Wire Warning

The Zircon StudSensor i65 is a center finding electronic wall scanner. Using the patented CenterVision technology, the SS i65 easily locates the center and edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. The specialized SpotLite Pointing System and an audio tone indicate the location of the target. In StudScan mode, the SSi65 locates the center and edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode by quickly pressing the Power Button twice to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The Signal Strength Bars will appear on the LCD screen when a stud is detected. As the stud finder detects the edge of a stud, “EDGE” will appear in the LCD screen. Continue to slide the tool along the wall until you hear an audio tone and see both the SpotLite Pointer as well as “CENTER” on the LCD. These signs indicate the center of the stud has been found. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling into the center of the stud. With the Zircon StudSensor i65, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

  • UPC: 042186618785
  • ASIN: B01J39MIAS
  • Brand: Zircon
  • Size: (unset)
  • Manufacturer: Zircon

Zircon StudSensor e40 Electronic Stud Finder

Zircon StudSensor e40 Electronic Stud Finder

The StudSensor e40 stud finder locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. Easy-to-read display and patented SpotLite Pointer clearly identifies the target while WireWarning detection indicates the presence of live AC voltage. Patented pivot pinch grip design and contoured shape provide an easy, secure hold in either hand, at any angle.

  • UPC: 042186633924
  • ASIN: B002R5AVKK
  • Brand: Zircon
  • Manufacturer: Zircon

Zircon StudSensor L70 OneStep Stud Finder

Zircon StudSensor L70 OneStep Stud Finder

The StudSensor L70 OneStep stud finder locates the center, edges, and direction of wood and metal studs while also alerting you to the presence of live AC electrical wiring. It features a bright, backlit LCD display and a low battery indicator informing you when your battery should be replaced for optimum performance.

  • UPC: 042186665277
  • ASIN: B01BVZQYKW
  • Brand: Zircon
  • Manufacturer: Zircon