Last4Ever Tip Tool - Combo Model

Last4Ever Tip Tool - Combo Model

FREE $6.95 LEATHER SHAFT BURNISHER WITH EVERY ORDER Last 4 Ever Tip Tool, Dime & Nickel Radius. Each tip tool starts as a machined blank cut from a solid piece of bar stock Aluminum. A medium grit abrasive is applied to the two concave radius' for the tip "Shaper," and a finer grit abrasive is applied to the "Mushroom Repair" surface. Finished cow hide is then applied to the remaining surface to be used to "Burnish" the tip sides following mushroom repair. The burnishing adds to both the appearance and performance of the tip as it hardens the side surface. After glueing, the tools are pressure clamped in a press to provide for superior adhesion. Additional information and instructional videos are available at last4ever web site Also available in Dime radius and Nickel radius tool with separate tip scuffer

  • UPC: 722589561825
  • ASIN: B0158V30OI
  • Brand: Last4Ever
  • Size: 3" x 1" x ⅝"
  • Manufacturer: Last4Ever

HSS 3/8-10 Tap Right Hand Pool Cue Building Tool Supplies Wood Lathe Accessories Shaft Thread Screw Joint Pin Installation - 4"(102mm) Long 3/8-10 Tap

HSS 3/8-10 Tap Right Hand Pool Cue Building Tool Supplies Wood Lathe Accessories Shaft Thread Screw Joint Pin Installation - 4"(102mm) Long 3/8-10 Tap

HSS 3/8-10 tap special thread for cue maker and repair works - 3/8x10 tap

  • ASIN: B010JWNH3A
  • Brand: Cuefits
  • Size: 3/8-10 x 4"
  • Manufacturer: Cuefits

HSS 5/16-14 Tap Pool Cue Building Tool Supply Wood Lathe Accessory Cue Shaft Insert Thread Screw Joint Pin Installation - 4"(102mm) Long 5/16-14 Tap

HSS 5/16-14 Tap Pool Cue Building Tool Supply Wood Lathe Accessory Cue Shaft Insert Thread Screw Joint Pin Installation - 4"(102mm) Long 5/16-14 Tap

HSS 5/16-14 tap special thread for cue maker and repair works - 5/16x14 tap

  • ASIN: B010K19AAE
  • Brand: Cuefits
  • Manufacturer: Cuefits

Felson Billiard Supplies - 3-in-1 Pool Cue Scuff and Shaper Tool - Improve Your Shot by Shaping, Scuffing and Aerating Your Pool Cue

Felson Billiard Supplies - 3-in-1 Pool Cue Scuff and Shaper Tool - Improve Your Shot by Shaping, Scuffing and Aerating Your Pool Cue

Victory is in the air. You've just beaten him. Your mate. The guy who was always King of the Table. But this time, you've bested him. You rose above. It was a tight match but you took a deep breath. Lined up your final shot. And drove that ball home. Your cue struck it perfectly. There was barely any vibration through it. It just connected and went exactly straight. Imagine you could play like this every time? Well you can, listen closely. We're about to tell you how...The 3-in-1 Pool Cue Scuff and Shaper Tool has been compactly designed so you can shape, scuff and poke the tip of your pool cue with ease. This allows you to hit the ball with better accuracy, more power and ultimately, win more games. And all that from a tiny bow tie shaped tool that fits in the palm of your hand. In fact, it's only 2.5 inches long so you can take it with you everywhere. Each tool has three functions that are clearly labelled on each side. You can shape the head for better contact and scuff it for better grip. This will allow you to better apply spin to the ball every time. Finally, by using the aerator you can poke holes in the tip of the cue, this will allow the tip to hold chalk for a better shot.Improve your shot today. Hit Add-To-Cart now!

  • UPC: 013031018746
  • ASIN: B00FQJXMJG
  • Brand: Felson Billiard Supplies
  • Manufacturer: Felson Billiard Supplies

HSS 3/8-11 Tap Pool Cue Building Tool Supplies Wood Lathe Accessories Cue Shaft Thread Screw Joint Pin Installation - 4"(102mm) Long 3/8-11 Tap

HSS 3/8-11 Tap Pool Cue Building Tool Supplies Wood Lathe Accessories Cue Shaft Thread Screw Joint Pin Installation - 4"(102mm) Long 3/8-11 Tap

HSS 3/8-11 tap special thread for cue maker and repair works - 3/8x11 tap

  • ASIN: B010JXP7TQ
  • Brand: Cuefits
  • Manufacturer: Cuefits

Cuetec Billiard/Pool Cue Accessory: Bowtie 3-in-1 Billiard Cue Tip Tool (Scuffer/Shaper/Aerator)

Cuetec Billiard/Pool Cue Accessory: Bowtie 3-in-1 Billiard Cue Tip Tool (Scuffer/Shaper/Aerator)

If you can only afford to get one tool for maintaining the tip of your cue, then the Cuetec bowtie tip tool is the one. This 3 in 1 tip tool includes a Shaper, a scuffer, and a tip pick that pokes the tip so it can hold chalk better and helps to avoid miscues. The perfect tool for every pool player. Small enough to fit in your pocket.

  • UPC: 885311439837
  • ASIN: B00CGG834G
  • Brand: Cuetec
  • Size: Single Tool
  • Manufacturer: Imperial International

Last4Ever Tip Tool - Nickel

Last4Ever Tip Tool - Nickel

FREE $6.95 LEATHER SHAFT BURNISHER WITH EVERY ORDER Last 4 Ever Tip Tool - Nickel Radius Each tip tool starts as a machined blank cut from a solid piece of bar stock Aluminum. A medium grit abrasive is applied to the concave radius for the tip "Shaper," heavy grit abrasive is applied to the flat base to be used as the "Scuffing" surface and a finer grit abrasive is applied to the "Mushroom Repair" surface. Finished cow hide is then applied to the remaining surface to be used to "Burnish" the tip sides following mushroom repair. The burnishing adds to both the appearance and performance of the tip as it hardens the side surface. After glueing, the tools are pressure clamped in a press to provide for superior adhesion. Additional information and instructional videos are available at last4ever web site Also available in Dime radius and a Dual radius tool with both Nickel and Dime radius.

  • UPC: 722589561801
  • ASIN: B0158W3R86
  • Brand: Last4Ever
  • Size: 3" x 1" x ½"
  • Manufacturer: Last4Ever

Etekcity 1022D Dual Laser Digital Infrared Thermometer Temperature Gun Non-contact -58℉~1022℉ (-50℃ ~ 550℃) with Adjustable Emissivity & Max Measure for Meat Refrigerator Pool Oven

Etekcity 1022D Dual Laser Digital Infrared Thermometer Temperature Gun Non-contact -58℉~1022℉ (-50℃ ~ 550℃) with Adjustable Emissivity & Max Measure for Meat Refrigerator Pool Oven

Temperature measurement has never been simpler! This Infrared Thermometer tackles the toughest jobs with ease thanks to a weather and scratch resistant UV paint coating, covering a scratch resistant polished plastic. Just by one press of the trigger, this thermometer will turn on, the laser pointer shows target and the big LCD will read the temperature in less than 0.5 second. Features & Specifications: 1. Measurement Range: -50°C~550°C (-58°F~1022°F) 2. Storage Temperature: -20 to 50°C (-4 to 122°F) 3. Operating Temperature: 0 to 50°C (32 to 122°F) 4. Accuracy:±2% /±2°C 5. Adjustable Emissivity: 0.1-1.0 6. Resolution: 0.1°F /°C 7. Distance to Spot Ratio: 12:1 8. Selected Thermometer units: ° C /° F 9. Response Time: < 500ms Package Included: 1x Etekcity Lasergrip 1022D Thermometer 1x 9V DC Battery 1x User's Manual Note: 1. This thermometer cannot test the temperature of target objects through across the glass. Besides, the steam, dust, smog will lower the accuracy of testing. 2. To make better accuracy, cover the surface to be measured with masking tape or flat black paint.

  • UPC: 783956540584
  • ASIN: B01BV0YMH4
  • Brand: Etekcity
  • Size: 7.5 x 4.5 x 1.5 inches
  • Manufacturer: Etekcity

Master Red Billiard Cue Stick Chalk 1 Dozen

Master Red Billiard Cue Stick Chalk 1 Dozen

Master Billiard Cue Chalk is an essential component to have on hand, whether you play recreationally or participate in professional tournaments. This professional grade billiard chalk delivers a smooth and even coating that will not cake or flake. Apply the chalk to the tip of the cue stick, ideally before every shot, to increase the friction between the cue tip and the struck ball; minimizing a miscue on a non-center hit. Available in a variety of colors, allowing you to match the chalk to the felt of your billiard table which diminishes chalk marks. Includes 12 chalk cubes packaged in protective box for convenient storage. Proudly made in the USA.

  • UPC: 720801183268
  • ASIN: B005GVGIUO
  • Brand: Master
  • Manufacturer: Master

ONMIER Mop and Broom Holder, Multipurpose Wall Mounted Organizer Storage Hooks, Ideal Tools Hanger for Kitchen Garden, Garage, laundry room (5 Position 6 Hooks)

ONMIER Mop and Broom Holder, Multipurpose Wall Mounted Organizer Storage Hooks, Ideal Tools Hanger for Kitchen Garden, Garage, laundry room (5 Position 6 Hooks)

Product Description:  Color: Light Gray  Material: Plastic  Size:  3x hang 4x hook:  25.5*6*7cm /10.04x2.36x2.76 inch  5x hang 6x hook:  40*6*7cm /15.75x2.36x2.76 inch  Maximum support weight: 10kg  Apply for: Organization, storage, etc  Cleaning tools: Brushes, brooms, mops, clothes rods, cleaning, laundry brushes, bath brushes, metal tools: axes, hand saws, flashlights, wrenches, electric knives, shears, tin snips, screwdrivers, gardening hoes, shovels, spades  Sports: Badminton racket, tennis racket, pool cues, golf clubs, baseball bat, jump rope, the grip, ball pump, fishing rods, etc  Kitchen appliances: kitchen knives, cutting boards, spoons, bottle opener, spatula, clean ball, Pan brushes etc  Packaging details:  1x Support  4x Screw

  • ASIN: B01MG2HYNG
  • Brand: ONMIER
  • Size: 5 Position 6 Hooks
  • Manufacturer: ONMIER